National Weather Service United States Department of Commerce

Rip Currents

Rip currents are powerful, channeled currents of water flowing away from shore. They typically extend from the shoreline, through the surf zone, and past the line of breaking waves. Rip currents can occur at any beach with breaking waves, including the Great Lakes.

Rip currents most typically form at low spots or breaks in sandbars, and also near structures such as groins, jetties and piers. Rip currents can be very narrow or extend in widths to hundreds of yards. The seaward pull of rip currents varies: sometimes the rip current ends just beyond the line of breaking waves, but sometimes rip currents continue to push hundreds of yards offshore.

Anatomy of the Rip Current.

Rip currents form as incoming waves create an underwater sandbar close to shore (#1 above), and the waves push more and more water in between the sandbar and the shore (#2) until a section of this sandbar collapses and the water rushes back toward the sea (#3) through a narrow gap. Once the flowing water passes through the narrow gap, it begins to spread out (#4). It is here where the velocity and strength of the rip current circulation begins to weaken considerably.

A strong rip current. Photo courtesy of Dennis Decker.

Rip currents can be killers as they are the leading surf hazard for all beachgoers. They are particularly dangerous for weak or non-swimmers. Rip current speeds are typically 1-2 feet per second. However, speeds as high as 8 feet per second have been measured which is faster than an Olympic swimmer can sprint!

The United States Lifesaving Association estimates that the annual number of deaths due to rip currents on our nation's beaches exceeds 100. Rip currents account for over 80% of rescues performed by surf beach lifeguards.

The drowning deaths occur when people, pulled offshore, are unable to keep themselves afloat and swim to shore. This may be due to any combination of fear, panic, exhaustion, or lack of swimming skills.

Dispelling the Myth of the Rip

A rip current is a horizontal motion not a vertical motion. Rip currents do not pull people under the water; they pull people away from shore. The rip current is typically the strongest about a foot off of the bottom, which can cause your feet to be knocked out from under you making it feel like something under the water was pulling you. This is where the incorrect term "undertow" comes from.

Also, another incorrect term used for rip currents is the "rip tide". Rip currents would exist with or without tides. However, low tide can enhance the intensity of the current.

Rip Currents: Where's the Rip?

Signs that a rip current is present are very subtle and difficult for the average beachgoer to identify. Look for differences in the water color, water motion, incoming wave shape or breaking point compared to adjacent conditions.

Look for a channel of churning, choppy water. Photo
courtesy of Dr. Wendy Carey, Delaware Sea Grant
Look for a line of foam, seaweed, or debris moving
seaward. Photo courtesy of Dr. Wendy Carey, Delaware
Sea Grant
Look for an area having a notable difference in water
color. Photo courtesy of Dr. Wendy Carey, Delaware
Sea Grant
Look for an area having a notable difference in water
color. Photo courtesy of Dr. Wendy Carey, Delaware
Sea Grant
Look for a break in the incoming wave pattern. Photo
courtesy of Dr. Wendy Carey, Delaware Sea Grant
Look for a break in the incoming wave pattern. Photo
courtesy of Dr. Tom Herrington, Stevens Institute
of Technology